HW Group PortStore5, Руководство пользователя

Страница: 31 / 36

PortStore5 Manual HW group
www.HW-group.com 31
∂
To permit communication with only one address, set N:255.255.255.255 and W:IP address of
the remote device.
∂
If you need 9-bit communication, enable &V1 = &V: Variable Parity On at both devices.
∂
To enhance security, disable TCP Setup on port 99 with %S0 = %S: TCP/IP setup Off at both
devices.
If security is an essential requirement and the device should only communicate within the local
network, use the following settings. In this case, only communication within the LAN segment is
allowed (0 to 255 at the end of the IP address).
I: Address 192.168.1.1
M: Mask 255.255.255.0
===== In IP access filter ======
W: Address 192.168.1.0
N: Mask 255.255.255.0
S: Send to IP 192.168.1.2
I: Address 192.168.1.2
M: Mask 255.255.255.0
===== In IP access filter ======
W: Address 192.168.1.0
N: Mask 255.255.255.0
S: Send to IP 192.168.1.1