Damocles2
Ares LTE
15
Sensors
Use this tab to configure basic and advanced properties of sensors:
•
State
– graphical information about sensor states (same as on the
General
tab).
•
ID
– unique sensor ID.
•
Name
– sensor name, used for easier overview and for further processing in other systems.
•
Current Value
– current sensor value.
•
Min.
– lower limit of the Safe Range. If the value is less than MIN, alarm is automatically set.
•
Max.
– upper limit of the Safe Range. If the value is more than MAX, alarm is automatically set.
•
Hyst.
– hysteresis for the given sensor.
•
Delay
– delays the alarm status in case the Safe Range values have been exceeded.
•
– sends an e-mail when the sensor is in alarm.
•
Email Templ.
– alarm message template. (See the
Email Templ.
tabs.).
•
SMS
– sends a text message (SMS) when the sensor is in alarm.
•
SMS Templ.
– alarm message template. (See the
SMS Templ.
tabs.).
•
Serial Code
– unique 1-Wire ID.
•
Del.
– removes the sensor from the list (e.g. when the sensor is disconnected). If the sensor
remains physically connected, it will be detected again when the Ares LTE unit is restarted.
Sensor no. 65535 is a system entry and cannot be deleted.
•
Find Sensors
– detects all connected sensors. By default, sensors are detected only when the
unit is powered up. Later connected sensors must be detected manually. Detected sensors
are automatically added to the list.
•
Delete All Sensors
– deletes all discovered sensors. Sensor no. 65535 is a system entry and
cannot be deleted.
•
Save
– saves all changes.
Advanced settings
•
Delete All Outputs
– deletes all discovered outputs.
•
Save
– saves all changes.
Содержание Ares 10 LTE
Страница 1: ...Ares 10 12 LTE User manual...