HW Group Ares 10 LTE, Руководство пользователя

Страница: 7 / 36

Damocles2
Ares LTE 7
First steps
Connect Ares LTE to PC with an USB cable and open the ARES disk that appears. Double-click
the AresConf application to start it. The
General tab appears and shows the device status:
This tab gives information about sensors and digital inputs, together with graphical symbols
for quick overview.
You can set the
Device Name and the unit of temperature (°C, °F, K) here. The temperature unit
changes about 5 seconds after pressing Save .
When starting the device for the first time, pay attention to the mobile network connection
and signal strength information. If the signal is too weak, relocate the antenna. If the modem
is unable to log in to the GSM network, check the PIN security code settings of the SIM. For
details, see
Advanced settings .
All deviations from normal are indicated graphically:
Sensor disconnected
(Alarm)
Sensor (Digital Input) out
of range, upper threshold
exceeded (Alarm)
Sensor (Digital Input) out
of range, lower threshold
exceeded (Alarm)
Sensor connected,
value within Safe Range
(no Alarm)
First steps
General