Huvitz HRK-9000A, Руководство по обслуживанию

Страница: 43 / 77

42 Auto Ref/Keratometer HRK-9000A ------------------------------------------------------------------------------------------------
1) REF SPH
- REF measurement results of the SPH Shift
2) REF CYL
- REF measurement results of the CYL Shift
3) REF AXS
- REF AXS results of measurements of the Shift
4) KER RAD
- KER measurement results of the curvature of the Shift
5) KER CYL
- KER measurement results of the astigmatism Shift
6) KER DOTS / MM
- KER measurements of the camera pixels, dots per mm
numbers
7) FOCUS-XA
- X is the range of pixels in the direction of Focus
8) FOCUS-YA
- Y direction pixel Focus Range
9) FOCUS-ZF
- Z direction of the front side (pigeoman direction) and the pixel
range of Focus
10) FOCUS-ZR
- Z direction after the side (contact point direction) and the pixel
range of Focus
11) CLR DOTS/MM
- CLR measurements of the camera pixels, dots per mm
12) REF REV-CNT
- REF revision count
C. For each set of items, set the left and right side of the value - or
click the plus sign.
After Measure Setup, engineer mode is stored by pressing the
SAVE SYS DATA
.