Huvitz Excelon CAB-4000, Руководство по обслуживанию

Страница: 34 / 59

Auto Blocker CAB-4000
33
No. Components Removal Method
1 Blocking Assy - Removing the ‘Tracer Module’.
1. Disconnect the cable connectors that linked [2]
from ‘GUI Board’ and ‘SMPS’.
2. Remove each five screws that fix [2] left side and
right sede.
3. Separate [2] pulling forward.
- Removing the ‘Image Camera’
1. Remove three screws that fix ‘GUI-BD-Brk’.
And then, open the ‘GUI-BD-Assy’ for right.
2. Remove four M3 wrench bolts that fix [4].
And then, separate [4] from [3].
- Removing ‘Inner Cover’
Î Must remove ‘the Inner Cover’ necessarily to
separate the ‘Blocking Arm Assy’, ‘Lensmeter Assy’,
‘Lens Support Assy’, ‘Image Projection Assy’
- Remove six M3 wrench bolts that fix [5].
Then, separate it for back direction.
- Remove six M3 wrench bolts that [6].
Then, extract forward as lifting on it.
- Assembly is the reverse procedure of disassembly.
2 Tracer Assy
3 Frame Assy
4 Image Camera Assy
5 Inner Back Cover
6 Inner BTM Cover
7
8
9
10
11
12
13
14
15
16
17
18
19
20