Huvema HU 480 X 2200 VAC TOPLINE, Инструкция по эксплуатации

Страница: 9 / 76

Fig 2-5
3. ELECTRICAL CIRCUIT CONTROL
3-1 Electrical wiring
The electrical wiring can be found by
opening the electrical control box located
on the back of the machine. Connect the
power source to the terminals labeled
R.S.T. (For 16” & 18” use 8 gauge wire,
for 22” & 26” use 4 gauge wire).
The connection between the power source
and the machine should be equipped with
a safety fuse. Also make sure the machine
is grounded.
8