Huvema HU 480 X 2200 VAC TOPLINE, Инструкция по эксплуатации

Страница: 16 / 76

4-5 The Importance and Method of Spindle Balancing
1. lathe with a spindle that is out of balance can cause chatter and a poor finish
on the workpiece. To ensure proper spindle balance, our lathes are equipped
with balancing weights located on the locking ring at the rear of the spindle.
2. To properly balance the spindle, first run the lathe at 1350rpm. Put the palm
of your hand on the headstock and check for any vibration. Moving the
balance weights left or right can eliminate any vibration detected.
4-6 Transmitting Power to the Gear Box
Lever
○
4
of item 1-1, controls the direction of the lead screw. This lever has
three positions, Left, Right and Neutral.
13