Huvema HU 480 X 2200 VAC TOPLINE, Инструкция по эксплуатации

Страница: 32 / 76

7-3
Gear Box
1. The oil inlet for the gearbox is located under the cover on top of the
gearbox. (See Fig. 7-3
○
A
)
2. The drain is located on the left bottom side of the gearbox near the 10
step feed selection dial as shown by arrow
○
B
Fig. 7-3.
3. Recommended lubricant is Shell Tellus No. 220 and should be changed
every 6 months.
Fig. 7-3
7-4
Tailstock Adjustment
1. Unclamp the tailstock – clamping lever.
2. Loosen the 2 hexagon head screws. (one on each side of tailstock)
3. Using a test bar between dead centers, make necessary adjustments sign
the slotted adjusting screws. (one on each side)
4. After adjusting re-tighten the two hexagon head screws and re-check for
alignment.
Fig. 7-4
31