Huvema HU 370 ASK, Руководство пользователя, Страница: 5 / 30

- 4 -
2 Safety Precautions
2-1 Introduction
1. Machine operators must read the manual thoroughly, and fully understand the
functions of the machine and its safety requirements before usage.
2. No one other than qualified operators should operate the machine.
3. This machine design has complied with safety requirements of your company. In case
of any concern, check on the detail of each requirement as needed.
4. The operator should check to ensure that the machine is connected to proper power
source before usage.
5. Depress emergency stop button and shut off power source if any unusual situation
occurs during usage.
6. Un-plug power source while installing, dismantling, maintaining, or adjusting the
machine
7. During the process of adjusting or testing the machine, if the electric power needs to
be on, the operator should pay extra attention to the action of automatic mode to
ensure people safety.
8. Keep the machine and its surrounding clean and bright to ensure operation safety.
9. Maintain the machine periodically to ensure normal functions of each part of the
machine.
10. Do not operate the machine beyond its specifications.
11. Do not remove or alter any safety protection part of the machine, such as saw blade
protection cover, operator safety cover, emergency power switch etc.
12. The operator must wear eye protective goggle while operating the machine.
2-2 Personal Protective Equipment
1. Operators and maintenance personnel carrying out various operations on the machine
must used personal protection equipment, e.g. goggles, boots and gloves to eliminate
the possible risks related to the various activities being carried out.
2. The clothing of machine operators and maintenance personnel must comply with the
essential safety requirements specified in community Directives 89/656/EEC,
89/686/EEC and laws in force in the country where the machine is installed.
3. Do not wear accessories or jewelers, including bracelets, watches, rings or necklaces,
when carrying out maintenance operations in which operation in unprotected area is
required to avoid mechanical risks, such as dragging, entrapment or other.