Huvema HU 370 ASK, Руководство пользователя, Страница: 12 / 30

- 12 -
Figure 4-2 Leveling points
4-4 Connecting Electric Power
1. Only qualified electrician can connect electric power.
2. The voltage, amperage and protection capacity of the power source shall meet the
requirement of the machine.
3. Check the rotation of the saw blade shaft (arbor). Change over two conductors in
junction box if the direction of rotation does not consist with the direction of the label
on the saw blade safety cover.
Note:
1. Assure the main power switch is at “OFF” position and the saw blade motor
speed select switch is at “OFF” position before connecting the machine to
electric power source
2. Do not install saw blade on the main shaft when checking the rotational
direction of the main shaft.
4-5 Add Cutting Oil
1. Add specified vegetable cutting oil to the oil can of the oil-mist jet located at the back
of the machine.
2. Add oil up to the fill-up line, around 5 liters.