Huvema HU 370 ASK, Руководство пользователя, Страница: 21 / 30

- 21 -
6-4 Adjustment of the miter cutting
1. Push the turning table fixing handle leftward.
2. Turn the turning table to the required angle.
3. Push the fixing handle rightward.
6-5 Specifications and Outline Drawing
MC-370AC TECHNICAL DATA
A-TYPE B-TYPE
MAIN MOTOR 3/2 HP, 2/4 POLE 2/1.4 HP, 4/8 POLE
ARBOR RPM (60 HZ) 44/22 50/22/1125
◎
Φ 115( 90
∘
)
□
100x100( 90
∘
)
CUTTING CAPACITY
● Φ 50
6-6 Adjustment of Sawblade Traveling
1. Turn the cutting head sliding (sawblade feeding) speed adjusting knob clockwise to
closed position.
2. Turn the sawblade speed selecting switch to OFF position.
3. Turn the main power switch to ON position.
4. Press the start button.
5. Open the cutting head sliding speed adjusting knob a little to let the saw blade
downward slowly.
6. Entirely close the sliding speed knob as the saw blade reach the expected lower
position.
7. Adjust the lowermost limit adjustment nut to such a position that it can activate the
lowermost limit switch which can stop the downward movement of cutting head.
8. Adjust the uppermost limit adjustment nut to such a position that the bottom tip of saw
blade is higher than the top of workpiece about 10~15 mm, and the uppermost limit
switch is activated at that position.
Note: Please refer to following figure for better understanding.