Huvema HU 30 DM, Руководство по эксплуатации

Страница: 17 / 46

-16-
Additional safety rules
Always keep in mind that:
- the machine must be switched off and disconnected from the power supply during maintenance and repairs,
- clamped workpieces may only be measured when the machine is switched off.
Never lean over the machine, mind loose clothing, ties, jewellery etc. and wear a cap.
Do not remove safety devices or guards. Never use the machine while a guard is open.
Always use safety glasses for machining rough materials.
Burrs and chips should only be removed using a sweeper or other aid, never with your bare hands!
Never leave the machine running unattended.
2. Characteristics and applications
Drilling capacity............................................................................................................................................ 32 mm
Face mill capacity ........................................................................................................................................ 76 mm
End mill capacity.......................................................................................................................................... 20 mm
Swing ......................................................................................................................................................... 405 mm
Max. distance spindle nose to table
.......................................................................................
457 mm
Spindle taper.................................................................................................................................................... MT3
Spindle stroke ............................................................................................................................................ 130 mm
Diameter of spindle sleeve .......................................................................................................................... 75 mm
Head swivel .....................................................................................................................................................360°
Diameter of column.................................................................................................................................... 115 mm
Overall height (w/o stand)........................................................................................................................ 1100 mm
Machine stand height................................................................................................................................. 760 mm
Length ...................................................................................................................................................... 1080 mm
Width........................................................................................................................................................ 1010 mm
Motor................................................................................................................................................1½ kW – 2 kW
Spindle speed rpm/min. 12s 50Hz........................................................................................................... 100-2080
Forward/backward travel of table .............................................................................................................. 175 mm
Longitudinal travel of table......................................................................................................................... 500 mm
Cross travel of table........................................................................................................................... 730x210 mm
Weight........................................................................................................................................................... 340kg
Subject to change.
3. Instructions for using this machine
Read the safety rules carefully and always observe them. Examine the applications of this machine and
beware of possible risks.
Always wear safety glasses.
4. Features
- This machine has several uses, such as surface cutting, drilling, milling and also can be equipped with an
electric switch for tapping.
- This machine is of fine quality, can be operated easily, and it is not limited to skilled operators.
- The drilling and milling operation can be performed by two methods:
- Hand operation, which makes quick drilling possible.
- Worn gear feed operation, which makes slow milling possible.
- Bronze adjustable nuts, which adjust the thread clearance and reduce the wear. They also make screws
rotated smoothly and increase the thread accuracy.