Huvema HU 30 DM, Руководство по эксплуатации

Страница: 18 / 46

-17-
- Whole column, which makes this machine strong, stable, and also keep the high accuracy.
- Head of though cast ensures its accuracy lasting and enduring through the treatment of precise boring
cylinder, grinding and internal stress relief.
- To adjust belt and change speed, the new pulley cover is easy to open.
5. Mounting machine
- Be sure to fix the head on the column and put the hanger on the head before moving the machine. While
moving the machine, please keep its balance and safety.
- Do not mount the machine at a sunshine place to avoid deformity of the machine and loss of accuracy.
- Check to see if the motor is turning in clockwise direction before connecting the electric distribution line.
- Mount the machine to a sturdy table or base. It is advisable that the table you choose is well constructed
to avoid any vibration during operation.
- Four holes are provided on the machine base for mounting. Before tightening bolts, please make sure that
the worktable on the machine is levelled lengthwise and crosswise. Use shims if necessary.
6. Maintenance
- Your machine has been coated with a heavy grease to protect it during shipping. This coating should be
completely removed before operating the machine. Commercial degreaser, kerosene or similar solvent
may be used to remove the grease from the machine, but avoid getting solvent on belts or other rubber
parts.
- After cleaning, coat all bright work with a light lubricant. Lubricate all points shown in Fig. A with medium
consistency machine oil. Lubricating points are shown in arrows.
7. Use of machine parts
See Figure A
1 Handle for raising/lowering head 5 Hand wheel for cross travel
2 Tapping switch (optional) 6 Hand wheel for micro feed
3 Knob for coupling/decoupling worm 7 Depth setting
4 Hand wheel for left/right travel
8. Precaution for operation
Check all parts for proper condition before operation; if normal safety precautions are noticed carefully, this
machine can provide you withstanding of accurate service.
Before operation
-
Fill the lubricant.
- In order to keep the accurate precision, the table must be free from dust and oil deposits.
- Check to see if the tools are correctly set and that the work piece is set firmly.
- Be sure that the speed is not set too fast.
- Be sure that everything is ready before use.
After operation
-
Turn off the electric switch.
- Turn down the tools.
- Clean the machine and coat it with lubricant.
- Cover the machine with a cloth to keep out the dust.