Hussmann MPCETNM6S, Руководство по установке и эксплуатации

Страница: 14 / 40

2-2
I
nstallatIon
P/N 3086855_C
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
2-2
E
lEctrIcal
/ r
EfrIgEratIon
WATER OUTLET AND WATER SEAL
The condensate water outlet is located in the
center of the merchandiser. The outlet has a
factory installed, external water seal.
For self contained models, this water seal
drains into the condensate evaporator pan
located beneath the merchandiser.
For installation or maintenance of the P-TRAP,
use only adhesive compatible with ABS fittings.
NOTE:
All lower base panels must be in place
when the refrigerator is operating. If not, air-
flow from the condenser will be directed over
the evaporator pan and defrost water in the
pan may overflow.
Refrigeration lines are under pressure.
Refrigerant must be recovered before
attempting any connection or repair.
Product will be degraded and may spoil if
allowed to sit in a non-refrigerated area.
— LOCK OUT / TAG OUT —
To avoid serious injury or death from electri-
cal shock, always disconnect the electrical
power at the main disconnect when servicing
or replacing any electrical component. This
includes, but is not limited to, such items as
doors, lights, fans, heaters, and thermostats.
Merchandiser must be grounded.
Do not remove the power supply cord ground.
Risk of Electric Shock. If cord or plug
becomes damaged, replace only with
a cord and plug of the same type.
1.3