Hussmann MPCETNM6S, Руководство по установке и эксплуатации

Страница: 30 / 40

3086855_C
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
5-2
s
ErvIcE
— t
EchnIcal
D
ata
19
Service
WARNING !
DISCONNECT THE ELECTRICAL POWER WHEN SERVICING OR REPLACING ANY ELEC-
TRICAL COMPONENT.
Produce and Deck Pan Assembly
Gain access to Coil fan assembly
Li bo om case deck pan using illustrated fi nger/ac-
cess hole to gain access to coil and fan assembly .
DECK PAN FINGER HOLE
To access compressor area
Remove all screws around the perimeter of the ac-
cess panel behind the case to expose compressor
unit and condensate pan through open sec on of the
rear wall.
Preventative Maintenance
(To be performed by trained service personnel)
Warning! Turn Off case before performing Preventive
Maintenance!
Condenser Coil:
a. Remove rear panel.
b. Using vacuum, vacuum and brush to dislodge and
remove dust on and in coil. Caution! Coil fins are sharp.
Handle with care! Do not bend fins!
c. Replace rear panel
Preventative Maintenance
Label (see pg. 22)
T-STAT LOCATION
Thermostat Sensor Access
Removing the rear interior wall will allow for acces to
the Thermostat Sensor placed above the Coil against
the rear wall.
FOR PROMPT SERVICE
When contacting the factory regarding problems,
be sure to have the Case Model and Serial
Number handy. This information is on a plate
located on the case itself.
1.6
1.7
— LOCK OUT / TAG OUT —
To avoid serious injury or death from electri-
cal shock, always disconnect the electrical
power at the main disconnect when servicing
or replacing any electrical component. This
includes, but is not limited to, such items as
doors, lights, fans, heaters, and thermostats.
Produce and Deck Pan Assembly
Gain access to coil fan assembly. Lift bottom
case deck pan using illustrated finger/access
hole to gain access to coil and fan assembly.