background image

All equipment should be thoroughly examined for
shipping damage before and during unloading.

This equipment has been carefully inspected at
our factory. Any claim for loss or damage must
be made to the carrier. The carrier will provide
any necessary inspection reports and/or claim
forms.

Every effort is made to ship all parts for the kit.
The Hussmann Service Center can be reached by
calling 

• from U.S. & Canada 1-800-922-1919 • 

• from Mexico 1-800-522-1900 • 

Merchandisers

®

M1GLE-93

Joining 

Back-to-Back

PARTS LIST 

(One Joining Kit per Two M1GLE-93)

Item

Quantity

Description

1.

6

Screw – Phillips Head – #8-18 x 

1

/

2

2.

2

Gasket Tape  1 x 

1

/

x 180

3.

2

Cap Screw  

5

/

16

-18 x 3 

1

/

2

in.

4.

8

Flat Washer  

5

/

16

5.

4

Lock Washer  

5

/

16

6.

4

Hex Nut  

5

/

16

-18  

7

2

Cap Screw  

5

/

16

-18 x 5 

1

/

2

in.

8.

1

Silicone Sealer

9.

1

Top Trim – 10 

1

/

2

in. x 84-in.

10.

2

Top Rail Trim

11.

2

Bumper – Top 

(C

UT TO FIT

)

12.

2

Bumper – Bottom 

(C

UT TO FIT

)

13.

8

Bracket — End Splashguard 

14.

20

Screw – SM Hex Head – TEK2 – #8-18 x 

1

/

2

15.

2

Splashguard Support 

1

P/N 0503478_A

April  2008

©2008 HUSSMANN CORPORATION • BRIDGETON, MO  63044-2483 U.S.A.
U.S. & CANADA 1-800-922-1919 • MEXICO 1-800-522-1900 • WWW.HUSSMANN.COM

Содержание Impact M1GLE-93











Отзывы: