Hussmann Impact M1GLE-93, Инструкция по сборке

Страница: 8 / 10

13
The top and bottom
bumpers should be
kept inside a cooler or
refrigerated case for at
least six (6) hours.
This
will allow the bumper to
contract.
Remove all remaining
shipping braces. Measure
and cut
Top Bumper – 11
and Bottom Bumper – 12 .
Use a miter box and fine-
tooth saw to cut bumpers
to length. Install the top
and bottom bumpers.
Remove protective film
from the bumpers once
installation is complete.
14
Replace interior back
panels.
Replace honeycomb and
retainers as shown in
Figure 15.
P/N 0503478_A
8
U.S. & Canada 1-800-922-1919 • Mexico 1-800-522-1900 • WWW.HUSSMANN.COM
Figure 13 — Remove Braces and Install Bumpers
Honeycomb
Figure 15 — Replace Honeycomb
Figure 14 — Remove Protective Film
Miter Box
Bumper
Shipping
Braces
Shipping
Braces