Husqvarna TS 300 E, Руководство пользователя и оператора

Страница: 31 / 56

14
English
This symbol indicates that the machine is in
conformance with the applicable European
directive.
• Tools : Water lubricated diamond disc
diameter 300 mm - diameter 350 x mm
(D)- bore 25.4 mm (AL).
(Information from your usual supplier).
Any application not corresponding with the inten-
ded use (use of a saw blade, abrasive disc, etc) is
prohibited.
Saw blade
Carborundum
disc
The disc cutter is designed to provide safe and reliable
service in operating conditions corresponding with the
instructions, but it can present dangers for the user and
risks of damage, consequently regular on site inspection
is necessary to ensure :
• Perfect technical condition (use for the purpose for
which it is intended and taking into account any risks,
and correction of any malfunction detrimental to safety).
• Use of a diamond disc for water lubricated cutting of
marble, stone, granite, brick and facings (porcelain,
glazed tiles, ceramics, etc). The use of any other disc
is forbidden (abrasive, saw, etc).
• Competent personnel (qualifications, age, training,
education) who have studied the manual in detail
before starting work: any fault of an electrical or other
nature must be checked by a competent person (elec-
trician, maintenance foreman, authorized dealer, etc).
• That the warnings and instructions marked on the
machine are followed (adequate personal protection,
correct use, general safety instructions, etc).
• That no modification, transformation or addition is
detrimental to safety and that it is carried out without
prior authorization from the manufacturer.
• Respect of the maintenance intervals and periodical
checks recommended.
• That only genuine spare parts are used for repairs.
• Use : Sawing marble, stone, granite, brick, cement
and all facings (porcelain, glazed tiles, ceramics, etc).
• Motor speed : 2800 rpm
• Disc speed : 2800 rpm
• Electrical protection : IP 55
• Depth of cut (E) :
- at 90° : Ø 350 = 100mm - at 45° : Ø 350 = 65mm
- at 90° : Ø 300 = 75mm - at 45° : Ø 300 = 45mm
• Length of cut (L) : E = 15 - 610mm
: E = 50 - 570mm
• Useable width (to the right)) (l) : 310mm.
• Dimensions (mm) L x l x h :
- 1120 x 620 x 1230 (with legs)
- 1120 x 620 x 650 (bench)
• Unladen weight : ± 80 kg (depending on model) :
- chassis 47 kg
- head 33 kg
• Disc cooling by water spray into the disc casing
• Minimum tank capacity : 40 liters.
• Water pump : 28 W - débit : 8 l/mn.
• Electricity supply :
- 230 V : H07-RNF 3 x 1,5 2 - Lg 3 m.
- 400 V : H07-RNF 4 ou 5 x 1,5 2 - Lg 3 m.
- 115 V : H07-RNF 3 x 2,5 2 - Lg 3 m.
SPECIAL INSTRUCTIONS
Use 1
Technical specifications 2
POWER VOLTAGE CURRENT PUMP
± 5 %
2,2 kW (3CV) 230 V 50 Hz 10 A 13 W 230 V
2,9 kW (4CV) 400 V 50 Hz 11,5A 13 W 230 V
Standard
MODEL POWER PRESSURE VIBRATION
LEVEL LEVEL LEVEL
LWA (DB) LPA (DB) G
EN ISO 3744 EN ISO 4871 ENV 25349
2,2kW - 230V 102 db 91 0,21
2,9kW - 400V 90 db 81,67 0,029
Instruction plate
TYPE TYPE SERIAL
FABRICATION
YEAR
WEIGHT POWER
VOLTAGE
FREQUENCY
INTENSITY
MAXI TOOL
BORE
SPEED
N° SERIE
ANNEE DE
FABRICATION
PUISSANCE
PLAGE DE
TENSION
FREQUENCE
INT. UTIL.
MASSE UTILE Kg kW
V
A
Hz
mm
mm
Ø MAXI OUTIL
Ø ALESAGE
T/MN - RPM
MANUFACTURER
• On receiving the machine check its condition.
• Always keep it perfectly clean.
• Check the supply cable lead periodically.
• Always keep alert when working.
• Check the mounting of the components (abnormal
vibration).
SEE FIG. 1
Chassis-tank
Leg
Water pump
Retaining jack
Tightening handle
Transport wheels
Drain plug
Motor
Lack of voltage switch
Carrying handles
Disc casing
Housing cover
Movable table
Table stop
Movable table stop
Manufacturer's plate
Cutting guide
Table locking
Operating handle
Dismantle your machine into two parts.
T
ABLE PART (SEE FIG 2)
• Remove the table by tilting it slightly so as to clear the
Inspection-Description of the machine 3
Handling - transport 4
T
AL
D
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19