Husqvarna TC 125, Руководство пользователя

Страница: 28 / 163

7 PREPARING FOR USE
26
7.3 Preparing the vehicle for difficult riding conditions
Info
Use of the vehicle under difficult conditions, such as on sand or on wet and muddy surfaces, can lead
to considerably more rapid wear of components such as the drive train, brake system, or suspension
components. For this reason, it may be necessary to inspect or replace parts before the next scheduled
service.
–
Seal the air filter box. ( p. 71)
–
Clean the air filter and air filter box. ( p. 70)
Info
Check the air filter approx. every 30 minutes.
–
Check the electrical connector for humidity and corrosion and to ensure it is firmly seated.
» If humidity, corrosion, or damage is found:
–
Clean and dry the connector, or change it if necessary.
Difficult riding conditions are:
–
Rides on dry sand. ( p. 26)
–
Rides on wet sand. ( p. 28)
–
Rides on wet and muddy circuits. ( p. 29)
–
Rides at high temperatures or slow riding. ( p. 30)
–
Riding at low temperatures and in snow. ( p. 30)
7.4 Preparing vehicle for rides on dry sand
M01129-01
–
Check the radiator cap.
Value on the radiator cap 1.8 bar (26 psi)
» If the indicated value does not correspond to the setpoint
value:
Warning
Danger of scalding During motorcycle
operation, the coolant gets very hot and is
under pressure.
–
Do not open the radiator, the radiator
hoses or other cooling system compo-
nents if the engine or the cooling system
are at operating temperature.
–
Allow the cooling system and the engine
to cool down before you open the radiator,
the radiator hoses or other components of
the cooling system.
–
In the event of scalding, rinse the area
affected immediately with lukewarm water.
–
Change the radiator cap.