Husqvarna TC 125, Руководство пользователя

Страница: 113 / 163

14 ELECTRICAL SYSTEM
111
14.2 Installing the battery (TX 300)
H00388-10
Main work
–
Position the battery in the battery compartment with the ter-
minals facing forward, and secure with holding bracket
1
.
Battery (HJTZ5S-FP) ( p. 148)
–
Mount and tighten screw
2
.
Guideline
Screw, battery sup-
port bracket M6 10 Nm (7.4 lbf ft)
–
Connect positive cable
5
to the battery.
Guideline
Screw, battery termi-
nal M5 2.5 Nm (1.84 lbf ft)
Contact disks
A
must be mounted under screws
3
and
cable sockets
4
with the claws toward the battery termi-
nal.
–
Slide positive terminal cover
6
over the positive terminal.
–
Connect negative cable
7
to the battery.
Guideline
Screw, battery termi-
nal M5 2.5 Nm (1.84 lbf ft)
–
Slide negative terminal cover
8
over the negative terminal.
Finishing work
–
Mount the seat. ( p. 67)
–
Install the air filter box cover. ( p. 69)
14.3 Recharging the battery (TX 300)
Warning
Risk of injury
Batteries contain harmful substances.
–
Keep batteries out of the reach of children.
–
Keep sparks and open flames away from the batteries.
–
Only charge batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging batteries.
Minimum clearance
1 m (3 ft)
–
Do not charge deeply discharged batteries if charge is already below the minimum voltage.
Minimum voltage before the start of the charge
9 V
–
Dispose of batteries with less than the minimum voltage correctly.
Warning
Environmental hazard
Batteries contain environmentally-hazardous materials.
–
Do not dispose of batteries as household waste.
–
Return batteries to your authorized Husqvarna Motorcycles dealer or dispose of them at a collection
point for used batteries.