Husqvarna TC 125, Руководство пользователя

Страница: 48 / 163

10 TUNING THE CHASSIS
46
10.9 Checking the riding sag of the shock absorber
402417-10
–
Measure dimension
A
of rear wheel unloaded. ( p. 44)
–
With another person holding the motorcycle, the rider, wear-
ing full protective clothing, sits on the seat in a normal sitting
position (feet on footrests) and bounces up and down a few
times.
The rear wheel suspension levels out.
–
Another person again measures the distance between the
rear axle and marking
SAG on the rear fender using the sag
gauge.
–
Note down the value as dimension
C
.
Info
The riding sag is the difference between measure-
ments
A and C .
–
Check the riding sag.
Guideline
Riding sag (TC 250) 105 mm (4.13 in)
Riding sag (TX 300) 105 mm (4.13 in)
» If the riding sag differs from the specified measurement:
–
Adjust the riding sag. ( p. 47)
10.10 Adjusting the spring pretension of the shock absorber
Caution
Risk of injury Parts of the shock absorber will fly off if the shock absorber is disassembled incor-
rectly.
The shock absorber is filled with highly compressed nitrogen.
–
Please follow the description provided. (Your authorized Husqvarna Motorcycles workshop will be
glad to help.)
Info
Before changing the spring pretension, make a note of the present setting, e.g., by measuring the length
of the spring.
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 53)
–
Remove the shock absorber. ( p. 63)
–
After removing the shock absorber, clean it thoroughly.