37
Care of Your Platinum 770
Nothing is Visible on the
GrapichDisplay
• The GraphicDispaly can be sensi-
tive to static electicity (ESD). If the
GraphicDisplay is turned out due to
static electricity, turn the machine off
and back on again. If the problem
remains, contact an authorized
Husqvarna Viking dealer.
Have your Platinum 770
Serviced Regularly by your
Husqvarna Viking Dealer!
If you have followed this trouble shoot-
ing information and still are having
sewing problems, take the machine to
your dealer. If there is a specifi c prob-
lem, it is a great help to test sew with
your thread on a scrap of your sewing
fabric. A sewing sample will often give
much better information than words.
Non-Original Parts and Accessories
The Platinum 770 warranty does not
cover any defect or damage caused by
use of non-original accessories or parts.
Fabric Does Not Move?
• Feed teeth up.
• Increase stitch length.
Bobbin Thread Breaks?
• Wind a new bobbin.
• Replace the bobbin in the machine,
check correct threading, page 10.
• If stitch plate hole is damaged -
replace stitch plate.
• Clean bobbin area.
Bobbin Winds Irregularly?
• Check threading for bobbin winding.
Wrong Stitch, Irregular
or Narrow Stitches?
• Cancel twin needle safety.
• Turn machine off and on to reset.
• Change needle, rethread top and
bobbin threads.
• Use stabilizer.
Machine Sews Slowly?
• Check speed
• Remove stitch plate and brush lint
from bobbin and teeth area.
• Have the machine serviced at your
dealer.
Machine Will Not Sew?
• Put bobbin winder spindle up into
sewing position.
• Check plugs are all the way into
machine.
• Check wall plug and power to wall
plug.
