Husqvarna Platinum 770 Скачать руководство пользователя | Manualshive

Страница: 2 / 44

background image

v.

1

.0

This houshold sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions should always be followed,
including the following:
Read all instructions before using this household sewing machine.

DANGER

- To reduce the risk of electric shock:

• A sewing machine should never be left unattended when plugged in. Always unplug

this sewing machine from the electric outlet immediately after using and before
cleaning.

• Always unplug before relamping. Replace bulb with same type rated 5 Watt.

WARNING

- To reduce the risk of burns, ﬁ re,

electric shock, or injury to persons:

• Do not allow to be used as a toy. Close attention is necessary when this sewing

machine is used by or near children and inﬁ rm persons.

• Use this sewing machine only for its intended use as described in this manual. Use only

attachments recommended by the manufacturer as contained in this manual.

• Never operate this sewing machine if it has a damaged cord or plug, if it is not working

properly, if it has been dropped or damaged, or dropped into water. Return the sewing
machine to the nearest authorized dealer or service center for examination, repair,
electrical or mechanical adjustment.

• Never operate the sewing machine with any air openings blocked. Keep ventilation

openings of the sewing machine and foot controller free from the accumulation of lint,
dust, and loose cloth.

• Keep

ﬁ ngers away from all moving parts. Special care is required around the sewing

machine needle.

•  Always use the proper needle plate. The wrong plate can cause the needle to break.
•  Do not use bent needles.
•  Do not pull or push fabric while stitching. It may deﬂ ect the needle causing it to break.
•  Switch the sewing machine off (“0”) when making any adjustment in the needle area,

such as threading needle, changing needle, threading bobbin, or changing presser foot,
etc.

• Always unplug sewing machine from the electrical outlet when removing covers,

lubricating, or when making any other user servicing adjustments mentioned in the
instruction manual.

•  Never drop or insert any object into any opening.
•  Do not use outdoors.
•  Do not operate where aerosol (spray) products are being used or where oxygen is

being administrated.

• To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

SAVE THESE INSTRUCTIONS

«
1
2
3
4
...
»

Содержание Platinum 770













































Отзывы:

Нет отзывов

Похожие инструкции для Platinum 770

Бренд: Janome Страницы: 25

Embroidery Professional BMP8

Бренд: Baby Lock Страницы: 11

Бренд: Feiyue Страницы: 11

ThermaBind T500Pro

Бренд: GBC Страницы: 38

Бренд: Gamma Страницы: 32

Бренд: Truvox Страницы: 12

Бренд: Sase Страницы: 76

Surface Prep Machine 390

Бренд: Sinclair Страницы: 13

Бренд: Kärcher Страницы: 54

All-Purpose Matador

Бренд: Nilfisk-Advance Страницы: 15

Бренд: Nilfisk-Advance Страницы: 30

Бренд: Seaga Страницы: 33

Бренд: LG Страницы: 36

Бренд: LG Страницы: 40

Бренд: LG Страницы: 76

Бренд: LG Страницы: 2

Бренд: Panasonic Страницы: 16

Easa-Phone KX-T1460

Бренд: Panasonic Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды