20
Functions and GraphicDisplay
CLR
Touch this button in
PROG
to delete the
whole or a part of a program (see page
28). When a program in a memory has
been deleted, the stitch length and -
width are shown as 0.0 on the display.
CLR – Language
This button is also used to set the
LAN
-
GUAGE
used by your Platinum 770. All
machines are pre set to English. To
change the language, touch
CLR
while
turning on the machine. Then step
between the langages by pressing the
selection buttons. Touch
M
to confi rm
your langauge selection.
Stitch Selection Menus
Your Platinum 770 has three different
main menus:
Stitches
Alphabets
Alphabet sub menu
An icon in the upper right corner
of the GraphicDisplay shows the cur-
rently selected menu.
Read more about how to select the dif-
ferent stitches on the following pages.
FUNC
Touch this button to step between the
different modes of your Platinum 770.
There are three different modes,
NORM
,
PROG
and
REP
. The
NORM
mode (normal
sewing mode) is always active when
the machine is turned on. Touch once
to activate the program mode (used
when programming), then touch again
to enter the
REP
mode that is used to
sew a programmed combination. Touch
again to return to
NORM
mode. The active
mode is indicated on the GraphicDisplay.
Selection Buttons
These buttons are used to advance or
return within a programmed sequence,
when adjusting the twin needle width,
the buttonhole size or the buttonhole
balance.
Memory
Your Platinum 770 has four different
memories where programmed combina-
tions can be saved. Each memory will
hold up to 55 stitches or letters. The
button is used to advance to the memory
required in
PROG
or
REP
. The current
memory number is shown in the lower
right corner of the GraphicDisplay.