31
Functions and GraphicDisplay
Change or Add a Stitch or Letter
Any stitch or letter can be changed
in
PROG
when the cursor is positioned
underneath it. Simply select the correct
stitch or letter, to replace the one you
would like to change.
To add a stitch or letter in
PROG
, move
the cursor to the position following the
one where you wish to add a stitch.
Touch
CLR
. Select the stitch you wish to
add. Touch
CLR
to bring up the rest of
the program again.
Adjust Stitches in a Program
If you want to adjust a stitch in a pro-
grammed sequence, position the cursor
under the stitch. The last stitch in a
programmed sequence can be adjusted
even though the cursor is positioned
after the stitch. You can adjust the stitch
length and width or mirror image a
stitch/letter.
The changes will automatically be
stored in the permanent memory.
Sew your Program
To sew your program, touch
FUNC
to
bring up the
REP
mode. Presser foot B is
recommended. A stop is indicated by a
stop sign symbol.
If you have programmed a stitch
sequence that is too long to be seen on
the GraphicDisplay, check it by stepping
forwards/backwards in the sequence
using the selection buttons.
Sew your program on a stabilized piece
of fabric.
Adjust Entire Stitch Program
In
REP
you can adjust the stitch length
and width or mirror image the entire
program. The changes will not be saved
in the permanent memory.
