13
Learn your Platinum 770
Presser Feet
Included there are a number of presser
feet for different purposes.
Presser Foot A
Fitted on the machine upon delivery.
This foot is used mainly for straight
stitching and zigzag stitching with a
stitch length longer than 1.0.
Presser Foot B
When sewing close zigzag stitches with
less than 1.0 mm stitch length; other
utility stitches or decorative stitches use
this foot. The tunnel at the bottom of
the foot is designed to feed smoothly
over the stitches.
Presser Foot C
This is the buttonhole foot and it has
guide lines to determine buttonhole
length. The middle mark gives a 9/16''
(15 mm) buttoning edge. The two
tunnels on the bottom of the foot
feed smoothly and straight over the
buttonhole columns.
Presser Foot D
This foot is used for blind hem stitches.
The inner edge of this foot guides
the fabric. The bottom of the foot is
designed to ride along the hem edge.
Presser Foot E
This is the zipper foot and can be
snapped on either to the right or to the
left of the needle. This makes it easy to
sew on both sides of the zipper.
Presser Foot H
This foot with a glide plate underneath,
is used when sewing foam, plastic, or
leather, min i miz ing the risk of these
materials sticking to the foot.
