FLYWHEEL
7
16
Check the keyway and key
Note that the key in the flywheel
is cast and can not be replaced.
If the key is damaged the fly-
wheel must be replaced. Only
the force of the centre nut is not
sufficient to hold the flywheel
in the right position.
Check the keyway and key
Note that the key in the flywheel is cast
and can not be replaced. If the key is
damaged the flywheel must be replaced.
As the ignition point is determined by
the position of the flywheel on the crank-
shaft, components must have exactly the
right placement in relation to each other.
Only the force of the centre nut is not
sufficient to hold the flywheel in the
right position.
Fit the flywheel
The crankshaft and the centre of the fly-
wheel must be free from grease when
assembling.
Align the key in the flywheel with the
keyway on the crankshaft. Fit the washer
and centre nut.
Tightening torque
18–22 lbf·ft/25–30 Nm
Use a torque wrench to tighten the centre
nut.
Fit the flywheel
The crankshaft and the centre of
the flywheel must be free from
grease when assembling.
Align the key in the fly wheel
with the keyway on the crank-
shaft. Fit the washer and nut.
Tightening torque
18–22 lbf·ft/25–30 Nm
Use a torque wrench to tighten
the nut.
18–22 lbf·ft/25–30 Nm
