Husqvarna AUTOMOWER 550 EPOS, Руководство оператора

Страница: 21 / 48

3.9.3.2 Weather timer
Weather timer
automatically adjust the cutting time to
the growth of the grass. The product is not permitted to
operate more than the schedule settings.
Note:
When using Weather timer , it is recommended
to make as much operating time as possible available
for
Weather timer
. Do not restrict the schedule more
than necessary.
The first operation of the day is set by the schedule
settings. The product always complete 1 mowing cycle,
and then
Weather timer
selects if the product will
continue to operate or not.
Note:
Weather timer is reset if the product does not
operate for more than 50 hours, or if a Reset of all user
settings
is done.
Weather timer
is not changed if a
Reset
of schedule settings is done.
3.9.3.3 ECO mode
If
ECO mode is enabled, it switches off the signal in the
charging station, when the product is parked or is
charging.
Note:
Use
ECO mode
to save energy and prevent
interference with other equipment, for example hearing
loops or garage doors.
Note:
To start the product manually in the work area,
push the STOP button before you remove the product
from the charging station. If not, the product cannot park
at the charging station.
3.9.4 Accessories
Settings for accessories mounted on the product can be
made in this menu.
3.9.4.1 Headlights
There are 4 different headlight settings that control when
the headlights are on:
•
Always on
• Evening only (19:00-00:00)
• Evening and night (19:00-07:00)
•
Always off
The headlight can be set to flash or to have a constant
light. The headlights can also be set to flash if there is
an error.
Note:
Husqvarna recommends to use the headlights
at night time.
3.9.4.2 To avoid collisions with the Automower ® house
When this option is enabled, the wear on the product
and the Automower
®
house is reduced, but it can result
in more uncut grass around the charging station.
3.9.5 General (Bluetooth
®
only)
This function is used to set time and date, or to reset to
default settings.
3.9.5.1 Time & date
The time and date can be changed manually, or by
using the time and date from the mobile device.
3.9.5.2 Reset to factory settings
The user settings can be reset to factory settings. All
map objects and the schedules will be deleted.
Note:
PIN code, Loop signal, Messages
and
Date &
Time
will not be reset.
3.9.6 Security (Bluetooth
®
only)
The security settings controls the PIN code, the
GeoFence and other security functions. The correct PIN-
code must be entered to get access to the
Security
menu in the Automower
®
Connect app.
1576 - 004 - 16.11.2021 Installation - 21