Husqvarna AUTOMOWER 550 EPOS, Руководство оператора

Страница: 20 / 48

• Operate the product and add waypoints to make a
path to the charging station.
• Save the maintenance point to automatically
connect the last waypoint to the docking point.
• Set the corridor width (A) for the maintenance
point. The corridor width can be set to 2-5 m /
6.6-16.4 ft.
A
3.9 Settings
The product has factory settings but the settings can be
adapted to each work area.
3.9.1 Schedule
In
Schedule
menu you can change the schedule settings
for the product. The Schedule is set for each work area
that is connected to the charging station.
Secondary
areas cannot be scheduled.
The schedule function controls which hours the product
is permitted to operate. When the product does not
operate it is parked in the charging station. You can see
which hours and days the product operates in the
schedule overview in the app.
The factory schedule setting lets the product to operate
around the clock 7 days a week.
To calculate the schedule setting, refer to
To calculate
the schedule setting on page 20
.
3.9.1.1 To calculate the schedule setting
1.
Calculate the dimension of your lawn in m
2
/ ft
2
.
2. Divide the m
2
/ ft
2
of the lawn with the approximate
operation capacity. Refer to table below.
3. The result is equal to the number of hours that the
product must operate each day.
Note:
The operation capacity is approximate and is
calculated for flat and open work area. If the work area
has a lot of slopes or obstacles, you need to increase
the Schedule settings.
Model Approximate operation capaci-
ty, m
2
/h / ft
2
/h
Automower
®
550
EPOS
208 / 2240
Example: A lawn of 3000 m
2
/ 32000 ft
2
, cut with an
Automower ® 550 EPOS.
3000 m 2 / 208 ≈ 14.5 h.
32000 ft
2
/ 2240 ≈ 14.5 h.
Days / week h / day Schedule settings
7 14.5 7:00 - 21:30 / 7:00 am -
9:30 pm
3.9.2 Cutting height
The cutting height is set individually for each work area.
The cutting height can be set to 20-60 mm / 0.8-2.4 in.
3.9.3 Operation
In the Operation's menu it is possible to change the
settings of the
Weather timer, ECO mode
and
Spiral
cutting .
3.9.3.1 Spiral cutting
If the product enters an area where it senses the grass
is longer than average, it can change the movement
pattern to
Spiral cutting
. This means that the product
mows in a spiral pattern to faster cut the area with
longer grass. It is possible to set the intensity of the
Spiral cutting
.
Very low / Low
intensity means that
Spiral
cutting begins less often. High / Very high intensity
means that
Spiral cutting
begins more often.
Note:
Spiral Cutting
does not start in slopes steeper
than 15%.
20 - Installation 1576 - 004 - 16.11.2021