Husqvarna Automower 320 Скачать руководство пользователя

Страница: 57 / 102

English - 55

The current value from the sensors can be read in the

display on the mower, as well as in Autocheck EXP.

5.1.4 Magnets for sensors

There are four magnets in the body, one for each

collision sensor and one for each lift sensor.

The magnets have a south and a north pole. It is

important that the magnets are fitted correctly. If they

are not fitted correctly the collision or lift sensor will

transmit a constant signal.
The magnets only need to be removed in exceptional

cases and if this is necessary it is very important

to mark them so that they are refitted correctly.

5.1.5 Cables

The various electrical components (e.g. circuit

boards, sensors and motors) are connected to each

other by various types of cables. The connectors on

the circuit boards are marked with text in English that

describes which cable is to be connected.
There are a number of points on the chassis to

which the cables can be attached with cable ties.

We recommend that these fixing points are used

at all times. It produces a safer installation and

reinforces the intuitive feel for where the cable

should be connected.

5.1.6 Battery

The robotic lawnmower is equipped with one (320)

or two (330X) special Li-Ion batteries. The battery

is maintenance-free, but has a limited life span.

The battery is expected to last for 3,000-4,000 charging

cycles.
The battery is specially adapted to minimise

disturbance to the loop sensors and is equipped with

additional overload protection. Use only an original

battery from the Husqvarna Group. The battery

must not be mixed up with similar batteries used for

instance with other GARDENA lawn care products.

5. REPAIR INSTRUCTIONS

Содержание Automower 320






































































































Результаты поиска

Содержание Automower 320

Отзывы:

Похожие инструкции для Automower 320

Бренды по названию

Популярные бренды

Husqvarna Automower 320, Техническое руководство

Результаты поиска

Содержание Automower 320

Отзывы:

Похожие инструкции для Automower 320

Бренды по названию

Популярные бренды