English - 52
5 Repair instructions
All repairs to robotic lawnmowers should be done indoors
on a clean work bench to protect sensitive components
from moisture and dirt.
All screws in the robotic lawnmower must be fitted using the
correct tightening torque according to the values in
Table 3:
Screw fasteners on page 79
.
Oil, grease and dirt on electrical connections
can cause intermittent faults on the robotic
lawnmower. These faults only occur
at times, which make them difficult to
find. Never touch sensitive electronic
components with your fingers, for example,
connectors or components on a circuit
board.
To avoid electrostatic discharge in
electronic components always earth
yourself, for example against a radiator,
before you start to work on electrical
components.
Always disconnect cables from a component
by pulling the connector. Do not pull the
actual cable.
Never use any form of silicone or the like
when repairing a robotic lawnmower.
If possible test that components work
before completely assembling the robotic
lawnmower.
IMPORTANT INFORMATION
5. REPAIR INSTRUCTIONS
