English - 18
The
Info - Loop - A signal
display mode shows the
loop signal from the boundary loop measured through
the loop sensors in the mower. The value should lie
between approximately 40 and 320 to ensure good
functionality. The closer to the loop the mower is,
the higher the value. When the robotic lawnmower
is directly over the loop, the value is 0 and when the
mower is outside of the loop, the value is negative.
The A signal is shown for all four loop sensors:
•
Front L:
Front left loop sensor
•
Front R:
Front right loop sensor
•
Rear L:
Rear left loop sensor
•
Rear R:
Rear right loop sensor
The
Info - Loop - G, F, N
display mode shows the loop
signals from the Guide wires and the F and N fields
measured through the loop sensors on the mower.
The signals are shown for all four loop sensors:
•
Front L:
Front left loop sensor
•
Front R:
Front right loop sensor
•
Rear L:
Rear left loop sensor
•
Rear R:
Rear right loop sensor
To ensure good functionality in guide wires, the value
for the Guide signal should be (-) 70 - 120 beside each
guide wire.
The
Info - Loop - Quality
display mode shows the loop
system’s signal quality measured through the loop
sensors in the mower. The loop signals can only be
interpreted if the value for
Quality
is 100%. If the value
is 99% or lower, the loop system does not function
correctly and thus none of the values displayed for the
signals are correct.
The
Info - Sensors - Status
display mode shows:
•
Collision, front
and
Collision, rear
: One way
of testing the collision sensor is to hold the
mower chassis by the stop button and move
the body forward and back with the handle
at the rear. The display shows
Yes
or
No
.
Continue to press on the body until you see
that the collision sensors work.
•
Lifted, R
and
Lifted, L
: To test the lift sensors,
lift up the front part of the body. When the
body is lifted up the lift sensors are activated
and the mower’s display shows
Yes
. When
the mower is in the lowered position
No
is
displayed.
Front L Front R Rear L Rear R
G1 signal 280
282
270
273
G2 signal 187
185
174
172
F signal
324
322
274
270
N signal
110
108
98
97
A signal
G, F, N
Quality
A signal
G, F, N
Quality
Signal quality, front L 100%
Signal quality, front R 100%
Signal quality, rear L
100%
Signal quality, rear R 100%
Collision, front:
No
Collision, rear:
No
Lifted, R:
No
Lifted, L:
No
Status
Temp
A-signal, front L
150
A-signal, front R
148
A-signal, rear L
140
A-signal, rear R
142
A signal
G, F, N
Quality
2. SPECIAL MENU FUNCTIONS
