Husqvarna Automower 320 Скачать руководство пользователя

Страница: 71 / 102

English - 69

5. REPAIR INSTRUCTIONS

5.13 Cleaning or replacing the

ventilation filter

1. Dismantle the body. Refer to 5.2.1 Dismantling the

body on page 57

2. Dismantle the front display cover by pulling up the

cover firmly.

3. Dismantle the front display cover bracket by

unscrewing the three screws with the display cover

closed. Remove the front bracket by lifting it straight

up, still with the display cover closed.

4. Clean the filter carefully with a clean and soft brush.

5. If damaged, the filter must be changed. To change

the filter:

6. a. Remove the damaged filter.

b. Clean thoroughly around the mounting surfaces.

c. Apply the new filter, ensuring the adhesive

surfaces fasten properly to the chassis.

7. Refit the bracket by pressing it straight down so the

spring springs back.

8. Check the function of the display cover and the stop

button.

9. Refit the display cover and body.

Содержание Automower 320






































































































Результаты поиска

Содержание Automower 320

Отзывы:

Похожие инструкции для Automower 320

Бренды по названию

Популярные бренды

Husqvarna Automower 320, Техническое руководство

Результаты поиска

Содержание Automower 320

Отзывы:

Похожие инструкции для Automower 320

Бренды по названию

Популярные бренды