manualshive.com logo in svg

Husqvarna 970445607, Руководство оператора, Страница: 18 / 20

Поделиться
Скачать
Husqvarna 970445607 Скачать руководство пользователя страница 18

Data

DM400

DM430

Drill diameter in concrete, mm/inch

165-350/

6.5-14

80-160/ 3-6 55-105/ 2-4

250-450/

8-18

125-250/

5-10

100-160/

4-6

Recommended water volume, l/min

1.7-2.4

1.1-1.6

0.9-1.3

2.0-2.5

1.5-2.0

1.2-1.6

Embedded connectivity

Note: This part is applicable only for products supplied

with embedded connectivity.

BLE technology radio spectrum

DM400

DM430

Frequency bands for the tool, GHz

2.402-2.480

2.402-2.480

Maximum radio-frequency power

transmitted, dBm/mW

4/2.5

4/2.5

LED indications

CAUTION: Overload again and again can do

damage to the product.

Indication on the product

Cause

Possible solution

1 green LED.

The tool is connected to mains voltage and can

be used.

N/A

Power output is less than 50% of available out-

put power.

2 green LEDs.

Power output is between 50% and 65% of avail-

able output power.

3 green LEDs.

Power output is between 65% and 80% of avail-

able output power.

3 green LEDs and 1 yellow

LED.

Maximum power output. Power output is more

than 80% of available output power.

3 green LEDs, 1 yellow

LED and 1 red LED.

There is a system overload.

Decrease the load to prevent start of

the Elgard

™

 motor overload protec-

tion.

All LEDs flash.

Elgard

™

 motor overload protection is started.

Decrease the load to go back to cor-

rect operation.

Elgard

™

 motor overload protection has stopped

the motor.

Refer to 

To reset the motor overload

protection on page 14

.

1 green LED flashes.

Smartstart

™

 is started.

Refer to 

To use Smartstart

™

 on

page 13

.

18

1188 - 008 - 14.09.2020

Содержание 970445607





















Отзывы:

Нет отзывов