34
– English
TANK UNIT
Replacing the fuel pipe and fuel filter
1.
Remove the fuel filter and attached pipe using hook
502 50 83-01.
2.
Pull the pipe out through the rubber grommet.
3.
Remove the rubber grommet.
4.
Fit a new rubber grommet on the pipe so that the pipe
protrudes approx. 80 mm/ 3.15".
5.
Insert the pipe from the outside and push the rubber
grommet in so it is secured in the hole.
6.
Pull out the pipe from the tank using hook 502 50 83-01, cut
off the end and fit the filter.
7.
Push the other pipe end up through the hole in the tank
unit. Adjust so that the pipe sticks out approx. 35 mm/ 1.40".
The pipe may need to be shifted in the rubber grommet.
Replacing the oil pipe and screen
1.
Remove the screen and attached pipe using hook
502 50 83-01.
2.
Pull out the pipe through the oil tank.
3.
If necessary dismantle the screen and clean.
4.
Fit a new pipe from the outside through the hole in the oil
tank. Let the pipe protrude 40 mm/1.60" above the flat
surface. The total length of the pipe should be
165 mm/6.50".
6.
Pull the pipe out through the tank using hook 502 50 83-01,
cut off the end and fit the screen.
Replacing the tank ventilator, fuel tank
1.
Push a screwdriver into the ventilator, turn and dismantle
the ventilator.
2.
Push in a new ventilator by using the handle of the screw-
driver.
L = 40 mm/ 1.60"
L = 35 mm/ 1.40"
80 mm/ 3.15"
Eng 33-44
97-12-03, 16.29
34
Содержание 335XPT California
Страница 1: ...101 89 44 26 335XPT Workshop Manual Eng Front 97 12 03 16 26 1 ...
Страница 8: ...8 English TOOLS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Eng 02 09 97 12 03 16 27 8 ...
Страница 13: ...English 13 1 2 2 5 4 2 3 8 10 10 15 2 3 2 3 2 5 4 20 26 2 3 6 7 2 5 4 SERVICE DATA Eng 10 18 97 12 03 16 27 13 ...