Husqvarna 325HDA55 X Series, Руководство оператора, Страница: 2 / 24

2
– English
SYMBOL EXPLANATION
WARNING! The hedge trimmer can
be dangerous!
Careless or incorrect use can result in
serious, even fatal injury.
Symbols
This product is in accordance with
applicable CE directives.
Always wear approved protective gloves.
Cutting tool. Do not touch the tool
without first switching off the engine.
Checks and/or maintenance should be
carried out with the engine switched off,
with the stop switch in the STOP
position.
Always use approved protective gloves.
Regular cleaning required.
Ocular control.
Approved eye protection must always be
used.
Other symbols/decals on the machine refer to
special certification requirements for certain
markets.
Use anti-slip and stable boots.
This machine is not electrically
insulated. If the machine touches or
comes close to high-voltage power lines
it could lead to death or serious injury.
Electricity can jump from one point to
another by arcing. The higher the
voltage, the greater the distance
electricity can jump. Electricity can also
travel through branches and other
objects, especially if they are wet.
Always keep a safe distance of at least
10 m (30 ft) between the machine and
high-voltage power lines and/or any
objects that are touching them. If you
need to work closer than this always
contact the relevant power company to
make sure the power is switched off
before you start work.
The machine can be dangerous. Make
sure that no people or animals come
closer than 15 m (45 ft) when the
machine is running.
Arrows which show limits for handle
mounting.
Always use
• Ear protection
• Approved eye protection
Read through the Operator‘s Manual
carefully and understand the content
before using the hedge trimmer.
Noise emission to the environment according
to the European Community’s Directive.
The machine’s emission is specified in
chapter Technical data and on label.
ATENTIE!
Dispozitivul pentru tuns gard viu poate fi
periculos.
Utilizare incorecta poate avea ca urmari
raniri grave sau chiar moarte
Cititi icu atentie manualul operatorului si
intelegeti continutul acestuia inainte de
utilizare dispozitivului de tuns gardul viu
Sageti ce indica limitarile pentru
montajul manarelor
Intotdeauna purtati manusi de protectie ce
respecta standadele in vigoare
Utilizati incaltaminte stabila cu talpi
anti-derapante
Utilizati :
Antifoane
Protectii pentru ochi
Nivelul emisiilor este in concordanta cu
Directivele Comunitatii Europene. Nivelul emisiilor
este precizat in tabelul cu date tehnice
Acest produs este in concordanta cu
directivele CE.
Aparat de taiere. Nu atingeti aparatul
de taiere fara ca mai inainte sa fi opriti
motorul
ALTE SIMBOLURI SE REFERA LA CERTIFICARI
SPECIALE PENTRU ANUMITE PIETE
Aceasta masina nu este izolata
electric. Daca masina vine in contact
cu liniile de inalta tensiune se poate
provoca moarte sau ranirea grava a
operatorului. Cu cat voltajul este mai
mare cu atat arcul electric poate fi
mai mare. Deasemenea
electricitatea poate fi transmisa si
prin intermediul ramurilor sau a altor
obiecte, in mod deosebit daca sunt
umede. Pastrati intotdeauna o
distanta de siguranta de 10 m intre
masina si liniile de inalta tensiune,
si /sau oricare alte obiecte care intra
in contact cu acestea. Daca totusi
este necesar sa lucrati mai aproape
de liniile de transport electricitate
contactati compania raspunzatoare
de acestea si solicitati intreruperea
transportului de electricitate pe
perioada cand dvs. lucrati.
Aceasta masina poate fi periculoasa,
asigurati-va ca nici un alt om sau
animal nu se afla pe o raza de 15 m
in jurul dvs. atunci cand motorul este
pornit.
Verificarea si intretinerea trebuie
efectuata numia atunci cand motorul
este oprit cu intrerupatorul in pozitie
STOP.
UTILIZATI INTOTDEAUNA
MANUSI DE PROTECTIE
CURATAREA REGULATE ESTE
NECESARA
Control vizuaL
Ochelari de protecti aprobati
trebuiesc utilizati intotdeauna