Emissions Control
repair or replacement of the part. That notwithstanding, any adjustment of a component that has a factory installed,
and properly operating, adjustment limiting device is still eligible for warranty coverage. The following emission
warranty parts list are covered:
SYSTEMS COVERED PARTS DESCRIPTION
Fuel Metering Carburetor assembly, fuel injection pump, fuel injection nozzle, fuel regulator Exhaust Catalytic
Converter, Exhaust Manifold Air Induction Air filter housing, air filter*, crankcase breather tube Ignition Flywheel
magneto, ignition pulse generator, ignition coil assembly, ignition control module, spark plug cap, spark plug* Positive
Crankcase Ventilation (PCV) System PCV valve, oil filler cap Evaporative System Fuel Tank, Fuel Cap, Fuel Lines,
Fuel Line Fittings, Clamps, Pressure Relief Valves, Purge Valves, Vapor Hoses, Carbon Canister, Canister Mounting
Brackets, Carbon Canister Purge Port Connector Misc. Parts Belts, hosing, tubing, fittings, seals, gaskets, clamps, and
switches associated with the above systems.
Emission-related parts will vary between vehicles; therefore, certain vehicles may not include all of the listed parts
or may include equivalent parts.
3. VOIDING OF WARRANTY:
THIS AND ANY OTHER WARRANTY SHALL BE VOID IF THE VEHICLE IS ABUSED OR USED IN AN UNINTENDED
MANNER OR SHOWS INDICATIONS THAT IT HAS BEEN ALTERED IN ANY WAY, INCLUDING, BUT NOT LIMITED
TO, MODIFICATION OF THE SPEED GOVERNOR, BRAKING SYSTEM, STEERING, TRANSAXLE, OR OTHER
OPERATING SYSTEMS OF THE VEHICLE TO CAUSE IT TO PERFORM OUTSIDE HUSQVARNA SPECIFICATIONS.
4. HOW TO MAKE A WARRANTY CLAIM:
To make a warranty claim under this limited warranty, you must present the vehicle or defective component to an
authorized HUSQVARNA dealer or send the defective component, freight prepaid, to WARRANTY SERVICES,
Husqvarna Professional Products, Inc., 7349 STATESVILLE ROAD, CHARLOTTE, NC 28269.
EMISSIONS CONTROL
LOOK FOR RELEVANT EMISSIONS DURABILITY PERIOD AND AIR INDEX INFORMATION
ON YOUR ENGINE EMISSIONS LABEL
Engines that are certified to meet the California Air Resources Board (CARB) Tier 2 Emission Standards must display
information regarding the Emissions Durability period and the Air Index. Briggs & Stratton makes this information
available to the consumer on our emission labels The engine emission label will indicate certification information.
The
Emissions Durability Period
describes the number of hours of actual running time for which the engine is
certified to be emissions compliant, assuming proper maintenance in accordance with the Operating & Maintenance
Instructions. The following categories are used:
Moderate:
Engine is certified to be emission compliant for 125 hours of actual engine running time.
Intermediate:
Engine is certified to be emission compliant for 250 hours of actual engine running time.
Extended:
Engine is certified to be emission compliant for 500 hours of actual engine running time. For example, a typical
walk-behind lawn mower is used 20 to 25 hours per year. Therefore, the
Emissions Durability Period
of an engine
with an
intermediate
rating would equate to 10 to 12 years.
Certain Briggs & Stratton engines will be certified to meet the United States Environmental Protection Agency (USEPA)
Phase 2 emission standards. For Phase 2 certified engines, the Emissions Compliance Period referred to on the
2009 HUV 4214, HUV 4414, andHUV 4414-XP Owner’s Manual
Page 53
