Husqvarna 2009 HUV 4214 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 57

background image

Accessories

ACCESSORIES

There is a complete line of accessory equipment available from our dealers/distributors.

Care should be taken that these accessories are properly installed by trained technicians and that they are used in the
manner for which they were designed.

See following WARNING and CAUTION.

WARNING

• Custom cab assemblies, canopy tops, weatherproof enclosures, and windshields will not protect

occupants from flying objects.

ELECTRIC WINCH ACCESSORY

If your vehicle is equipped with an electric winch, read and follow all manufacturer safety warnings and instructions in
the winch operator manual, as well as the following WARNING and CAUTION statements. Make sure a winch warning
decal is affixed to the vehicle on the seat support panel next to the receptacle for the remote operation switch.

The winch kit available includes a remote operation switch, which enables the operator to move away from the vehicle
and cable.

See following WARNING and CAUTION.

WARNING

• Before beginning a winch operation:

– Turn key switch to the OFF position, put Forward/Reverse handle in the NEUTRAL position, and

engage the park brake.

– Do not use winch while persons are seated on the vehicle.

• Stand to the side and away from the vehicle to operate winch.

CAUTION

• Use of the winch for an extended period of time could discharge the battery. Keep winch operations

as short as possible, and drive the vehicle for several minutes after the winch operation to recharge
the battery.

MUD TIRE OPTION

4x4 vehicles equipped with optional mud tires are intended only for off-road operation; they are not designed for use
on paved surfaces such as asphalt and concrete. Frequent driving on paved surfaces will significantly decrease the
life of the mud tires. Vehicle performance will also be reduced when driving on paved surfaces.

See following

WARNING and CAUTION.

WARNING

• To avoid the risk of rollover when operating a vehicle equipped with mud tires on a paved surface:

reduce speed, use extreme caution, and drive slowly in turns.

• The diameter of all tires on the vehicle must be equal; otherwise the four-wheel drive system will not

operate as intended and could result in severe personal injury or death. Never install tires of different
diameters on the vehicle.

2009 HUV 4214, HUV 4414, andHUV 4414-XP Owner’s Manual

Page 47

«
...
47
48
49
50
51
...
»

Содержание 2009 HUV 4214


























































Отзывы:

Нет отзывов

Похожие инструкции для 2009 HUV 4214

120 Sno Pro 2010

Бренд: Arctic Cat Страницы: 562

Бренд: Landoll Страницы: 48

Бренд: Land Pride Страницы: 50

Hawkeye 2X4 2007

Бренд: Polaris Страницы: 141

Бренд: Polaris Страницы: 133

RANGER 500 2017

Бренд: Polaris Страницы: 574

2010 Scrambler 4X4

Бренд: Polaris Страницы: 133

Sportsman BIG BOSS 6X6 800 EFI

Бренд: Polaris Страницы: 100

Utility Vehicle Workshop

Бренд: Bush Hog Страницы: 11

Бренд: Vermeer Страницы: 88

Бренд: Topcon Страницы: 58

Бренд: KTM Страницы: 197

Sportsman 800 EFI

Бренд: Polaris Страницы: 388

honey joy TY283250

Бренд: Costway Страницы: 28

Sportsman 90 2011

Бренд: Polaris Страницы: 12

2015 39 Roadster NEV

Бренд: ACG Страницы: 77

Ranger 500 2x4 2007

Бренд: Polaris Страницы: 345

eXtreme Sport ES150IIR

Бренд: Hammerhead Страницы: 67

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды