Husqvarna Viking Rose 605, Руководство пользователя

Страница: 36 / 64

Instruction book Rose
36
For better visibility the machine
sews buttonholes away from you.
Buttonholes
You can select different buttonhole
styles.
Buttonhole the bartack
buttonhole, used for medium and
heavy fabrics.
Buttonhole keyhole buttonhole
for tailored garments
Buttonhole round end button-
hole, for light fabrics.
1. Select a buttonhole.
2. Use the presser foot C or the
buttonhole sensor foot.
3. Mark the buttonhole location on
your fabric.
When sewing stretch fabrics, use a
fusible stabilizer or a cord.
The buttonhole feet
has guide lines to
determine
buttonhole length.
The middle mark on
foot C gives a 1.5
cm buttoning edge.
Place the button on
the presser foot
against the needle
and you will be able
to see which mark
on the foot
corresponds to the
button. You will sew
until the first
buttonhole column
reaches this mark.
There is a small
finger at the back of
the presser foot. For a corded
buttonhole, loop your cord around
the finger as illustrated.
4. Place the material in the machine
and begin at the bottom of the
buttonhole.
5. Sew the first
column of the
buttonhole to the
required length,
use the markings.
6. Touch the reverse
button .
7. Continue to sew
the buttonhole
until the other
column is the
same length as the
first, touch the
button.
8. The machine will
bartack the other
end, a few tie off
stitches in the first column of the
buttonhole and will then stop.
Sew the next buttonhole in the
same manner.
NOTE: Always stitch a sample
buttonhole on scraps of the garment
fabric to check size before sewing
buttonholes on the garment.
Se
wing