Husqvarna Viking Rose 605, Руководство пользователя

Страница: 25 / 64

Instruction book Rose
25
Look through the program
If you have programmed several of
the memories you can press
FUNC
for PROG or REP. Use the M but-
ton to select the following memory
and then advance with the buttons
.
The memory last used will appear
on the display when you select
PROG or REP.
CLR - Deleting stitches
If you wish to delete a certain stitch
within the program:
1. In the PROG position, use one of
the buttons until the
actual stitch number is displayed.
2. Touch CLR . Now the stitch and
everything to the right of it will
be deleted.
3. If you wish to delete the whole
program, touch the FUNC button
to return to PROG. The machine
will be positioned at the first
programmed stitch.
4. Touch CLR. CLR deletes the
program of stitches in the
selected menu.
If you by mistake touch CLR, simply
touch CLR again to bring back the
balance of your program as long as
you have not used another button.
When the program memory is empty
the stitch length and width is shown
as 0.0/0.0 on the display.
Letters are deleted in the same way.
Darning and taper satin stitches
The stitches 11-12 can only be
selected in
NORM position. They
can not be programmed or
combined but are set individually
and automatically. For stitches 11
and 12 there are stitch memories
where the number of stitches, length
or width changes are stored.
1. Sew until the stitch has reached
the desired length.
2. Touch the button. The ma-
chine now completes the stitch.
3. When you have the result you
wish, touch STOP.
4. The stitch will now repeat in
succession and the machine will
stop automatically when the stitch
is completed
If you wish to sew another stitch
and then return to your stitch, you
only select this stitch and touch
STOP.
The repeated stitch is retained even
if you switch off the machine.
If you attempt to program these
stitches in the
PROG position,
PROG is flashing to indicate that this
is not possible.
11 12
Functions