![Husqvarna Viking Rose 605 Скачать руководство пользователя страница 31](http://html.mh-extra.com/html/husqvarna-viking/rose-605/rose-605_user-manual_2189125031.webp)
Instruction book Rose
31
Sewing embroideries
8.
The machine stops automatically
when it is time to change thread
color. The display indicates which
thread color change you have
reached by a flashing number
next to the thread spool
.
Go back a few stitches using the
button and restart. The symbol goes
out.
After finishing the embroidery
sewing:
1.
Remove the embroidery hoop by
pressing the button to the right
on the hoop. Pull the hoop
toward you.
2.
Touch
CLR
and the embroidery
arm returns to ready position. In
this position you may remove the
embroidery unit from the
machine (by pushing the button
on the center left underside), after
turning the machine off.
A flashing number indicates the
first stitch of the ”new” thread
color. The number stops flashing
when you begin to sew.
9.
Once thread is changed, start
sewing again. The machine stops
for cutting the thread tail and at
next thread color change etc.,
until the embroidery is
completed.
During the sewing the embroidery
hoop moves to different places
within the embroidery, where jump
stitches are sewn. Cut off these
stitches as you sew, i.e. when the
machine stops for thread color
change.
In most cases the embroidery is
sewn over the jump stitches, but in
some cases a part of the thread can
be visible and difficult to cut off
afterwards.
If the upper thread breaks while
sewing, the machine stops and gives
a signal. The symbol
is flashing
on the display. Rethread the
machine.
The machine stops also when the
thread spool runs out. When this
occurs, remove the work and the
bobbin. Re-thread the machine,
replace the bobbin. Go back a few
stitches past the point where the
bobbin thread run out, using the
button. Re-start and the embroidery
will be completed.
If the bobbin thread runs out,
remove the work and the bobbin.
Wind and replace the bobbin.
Replace the work, pull the upper
thread back. Go back a few stitches
using the
button. Re-start and the
embroidery will be completed.
To check how much bobbin thread
is left, touch
CLR.
The embroidery
arm returns into ready position.
Touch
CLR
to move the embroidery
arm back to stitch position and pull
the upper thread back.
Embr
oider
y
Содержание Rose 605
Страница 1: ...K E E P I N G T H E W O R L D S E W I N G User s Guide 605 ...
Страница 61: ...Instruction book Rose 61 ...
Страница 62: ...Instruction book Rose 62 ...
Страница 63: ...Instruction book Rose 63 ...