manualshive.com logo in svg

Husqvarna Viking Rose 605, Руководство пользователя

Поделиться
Скачать
Husqvarna Viking Rose 605 Скачать руководство пользователя страница 16

Instruction book Rose

16

Changing the needle

!

  Switch off the main switch.

1.

 Loosen the screw in the needle

clamp.

2.

 Remove the needle.

3.

 Push up the new needle with the

flat side away from you until it
will go no further.

4.

 Tighten the screw properly.

Always use needles of system
130/705H.

Lowering the feed teeth

The feed teeth are lowered when
you turn the dial to the left to 

 .

Turn the dial to the right to 

 if

you wish to raise the feed teeth. The
feed teeth will not come up until
you begin to sew.

The feed teeth are lowered when
sewing buttons and for free-hand
work.

By lowering the feed teeth it is
easier to get thick garments under
the presser foot. Do not forget to
raise the feed teeth before starting to
sew.

Note:

 The feed teeth are lowered

automatically when the embroidery
unit is put in place.
When removing the embroidery
unit, the feed teeth will raise as you
start to sew.

Pr

ocedur

es

Содержание Rose 605

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды