4
Safety Information (continued)
□
Wear safety glasses and use hearing protection when operating
the unit.
□
Do not stand on or use the unit as a hand hold.
□
Do not wear loose clothing or jewelry that will get caught in the
moving parts of the unit.
□
Keep fingers away from a running compressor; fast moving and
hot parts will cause injury and/or burns. Compressor parts may
be hot even if the unit is stopped.
□
Follow all local electrical and safety codes as well as in
the United States, the National Electrical Codes (NEC), and
Occupational Safety and Health Act (OSHA).
□
Avoid body contact with grounded surfaces such as pipes,
radiators, ranges, and refrigerators. There is an increased risk of
electric shock if your body is grounded.
□
Do not expose power equipment to rain or wet conditions. Water
entering the power equipment will increase the risk of electric
shock.
□
Replace damaged cords / wiring immediately. Damaged cords /
wiring increase the risk of electric shock.
□
Do not smoke when spraying paint, insecticides, or other
flammable substances.
□
Use a face mask / respirator when spraying and spray in a well
ventilated area to prevent health and fire hazards.
□
Do not direct paint or other sprayed material at the compressor.
Locate the compressor as far away from the spraying area as
possible to minimize overspray accumulation on the compressor.
□
When spraying or cleaning with solvents or toxic chemicals,
follow the instructions provided by the chemical manufacturer.
PERSONAL SAFETY
ELECTRICAL SAFETY
SPRAYING PRECAUTIONS
WARNING:
Never operate the compressor without a
beltguard. This unit can start automatically without
warning. Personal injury or property damage could
occur from contact with moving parts.
WARNING:
Improper electrical grounding can result in
electrical shock. The wiring should be done by a qualified
electrician.
WARNING:
Do not spray flammable materials in the
vicinity of an open flame or near ignition sources
including the compressor unit.
CAUTION:
Compressor parts may be hot even if the unit
is stopped.
CAUTION:
Improper electrical installation of this
product may void its warranty. Have circuit wiring
performed by qualified personnel, such as a licensed
electrician who is familiar with the current national
and local electrical codes.