Technical Support (707) 544-4761
2
www.HURST-SHIFTERS.com
2. Remove the front driver side and passenger side
panels from the center console.
Tool: Plastic Trim Remover
3. Remove the two (2) screws from both sides of the
console.
Tools: 7mm Socket, Extension, Ratchet
4. Unsnap the shift boot bezel from the console. Lift from
the top to release the top clips and then use the pry tool
to un-clip the rest.
Tool: Plastic Trim Remover
5. Remove the center console. Start by releasing the
locking tabs at the rear of the console while working
your way forward.
Tool: Plastic Trim Remover x 2
