Technical Support (707) 544-4761
11
www.HURST-SHIFTERS.com
37.
Install the new polyurethane bushing supplied with
the kit.
38. Insert it into the bracket clip. You will need to form
the clip bracket around the new bushing to make it
easier for install. The holes need to be 4.21 inches
apart to be re-installed. It will be improbable that you
will get it to hold at 4.21 inches apart, but try to get it
close to 4.21 inches as possible. You will rely on a pair
of channel locks to compress the assembly during
install.
40. Working from the inside of the vehicle slide the new
reverse lockout down over the Indy shifter. This is a dry
install no grease is required.
39. Working in reverse order step 21 through step 11, reinstall the shifter housing
assembly, driveline, crossmember and exhaust if undone. Re-torque all bolts to factory
torque specifications.
