21
Assembling and Disassembling the Extraction Packing / Seal Packing
(if it is not assembled properly, juice may leak)
Hold the packing and pull it
out smoothly.
Insert one of the edges, and
then put it down.
Insert the other parts and put
them down firmly.
01
01
01
02
02
02
03
03
03
Assembling and Disassembling the Screw Packing
(if it is not assembled properly, the packing may be damaged)
01
02
03
Separating and Washing
Disassembling and Washing Silicon Components
(Packing is a consumable component and replacement is recommended every 6 months ~ 1 year.
You can purchase components through the Customer Center.)
Assembling and Disassembling Chamber Packing
(The juice will leak if not assembled properly.)
Assembling and Disassembling Chamber Juice Cap Packing
(The juice will leak if not assembled properly.)
Remove the packing as though
it is pulled inside out from one
side.
Remove the packing as though
it is pulled inside out.
After washing, fit one side along
with the chamber hole like a
hook by checking the top and
bottom sides of the packing.
After washing, fit one side of
the packing first like a hook.
Push the rest of the packing in
a way that no parts are folded.
Fit the rest and push it in
around the rim.
Flip over the screw and pull
to remove it as if you are
pinching it.
After washing, hold the packing
in a way that the thin part of the
packing faces outwards.
Place the packing on the
bottom of the screw and push
it in so that it will not fall off.
