13
06
Discharge Cover
05
02
03
Place the inner strainer fit into the outer
strainer in the chamber.
Match the binding point (
⑤
) of the inner
strainer and the wings of the outer strainer
(
④
) when putting the parts together.
Place the screw in the assembly in 02.
Make sure the screw packing (
⑥
) is properly
placed under the screw before putting the
parts together.
Turn the hopper clockwise up to the mark
[ ] on the chamber.
The hopper will not close if the inner parts
are not assembled properly.
Assembling Juice Chamber Set
※
Assembly Guide with Main Body is in p16.
Screw
Inner Strainer
Out Strainer
Hopper
Make sure the discharge cover (
①
) of the
chamber is properly fastened with the loop.
1. Close the discharge cover and fasten
it with the loop.
2. If the packing is not properly assembled or
the lever is not properly closed, the lever
may open or, juice may leak during
extraction.
