Huper huberDVR 2400, Руководство пользователя

Страница: 225 / 249

9
Right-click on the split screen to restore it back to the previous size. When you continue to
right-click on the split screen, it will return to its original size.
Split Screen Controls
Use these buttons to change how split screens are displayed on the program screen.
Toggles between Full-screen and Normal display modes.
Displays a split screen in full window size.
Splits the Multi-screen Display into 4 split screens.
Splits the Multi-screen Display into 9 split screens.
Splits the Multi-screen Display into 16 split screens.
If there are more remote cameras from other DVR sites that cannot be fit
within the program screen, click this button to switch the display to the next
group of cameras.
If there are more remote cameras from other DVR sites that cannot be fit
within the program screen, click this button to loop the display of the cameras.
After an elapsed time, the window screen will automatically switch to the next
group of cameras or sites.
Displaying Cameras with Detected Events Only
Click to display only the remote cameras that have been detected with events. The
split-screen display of the other cameras will temporarily be turned off. In this mode, only
detected events will be recorded if video recording is enabled.
To switch back and display all cameras, click again.
Note: In the Preferences dialog box: Alarm tab , you can set up huperRemote to sound an alarm in your
computer when there are detected events. In this mode, record the detected event only if the
video recording is enabled. (See page 30 for details).