HunterDouglas Silhouette Duolite Window Shadings PowerView Motorization, Установка Эксплуатация Уход

Страница: 7 / 36

INSTALLATION
5
■ ■
Review the minimum depth requirements in the table below.
■ ■
Center the installation brackets on your marks and mark the location of the screw holes.
■ ➤
Allow sufficient rear clearance when positioning the
brackets. With no back cover, the bottom tab provides the
necessary clearance (
1
/
4
") for all systems except PowerView
and SoftTouch with a battery wand, which requires
7
/
8
" rear
clearance. (Rear clearance is the distance between the back
of the installation bracket and the glass or frame.)
Add an extra
1
/
4
" of rear clearance if the optional back
cover is used.
■ ■
Use a level to check that the mounting surface is level. Shim
(not provided) the brackets, if necessary.
■ ■
Use a
3
/
32
" drill bit to drill holes for the mounting screws.
CAUTION:
Use drywall anchors when mounting into drywall.
■ ■
Attach the installation brackets using the screws provided.
NOTE: Do not overtighten the screws. Check to ensure the lever
can be moved easily side to side. If the lever is not moving easily,
loosen the screws in one-eighth turn increments until it can be
moved easily.
IMPORTANT:
The front edges of the installation brackets must
be level and aligned to each other.
UltraGlide
®
Shading: Proceed to “STEP 3: Install the Shading” on page 9.
PowerView and SoftTouch Shadings: Proceed to “STEP 2: PowerView and SoftTouch Only —
Connect the Power Cable” on page 8.
Lever
Operating System Type
Minimum Mounting Depth Fully Recessed Depth
No Back Cover With Back Cover No Back Cover With Back Cover
PowerView ® and SoftTouch
™
with
Battery Wand
1
3
/
4
" 2" 4
5
/
16
" 4
9
/
16
"
UltraGlide ® 1" 1
1
/
4
" 3
13
/
16
" 4
1
/
16
"