background image

CHILD SAFETY

15

Child Safety

Young children can STRANGLE in cord loops and in the loop above the cord stop. They 
can also wrap cords around their necks and STRANGLE.

 

Always keep cords out of the reach of children.

 

Move cribs, playpens and other furniture away from cords. 

Children can climb 

furniture to get to cords.

 

Do not tie cords together. 

Make sure cords do not twist together and create a loop.

 

Hunter Douglas provides cord cleats and we recommend their use. 

Attach 

two cord cleats 6" to 12" apart at a height where they will be out of the reach of 
children. Take into account that a child may stand on furniture attempting to reach 
the cords.

 

Be sure the cord cleats are firmly secured.

 

Once the cord cleats are attached, wrap excess cord around them after each use 
of the shade.

 

Replacement or additional cord cleats may be obtained by contacting the Hunter 
Douglas Customer Information Center at 1-888-501-8364.

Safety Cord Stop

 

The safety cord stop reduces the risk of loops formed by pulling out the back cords. 

 

This component also breaks apart with minimal pressure should a child or pet become 
entangled in the top lift cords. 

 

To reassemble the cord stop: 

 

Re-insert any loose cords into the top notches of the cord stop. There is a notch on  
each side.

 

Line up the two halves of the cord stop and snap the pieces back together.

WARNING

For more safety information call 1-888-501-8364 
in the U.S. or 1-866-662-0666 in Canada. 

Four

Cords

Two

Cords

Содержание Design Studio





















Отзывы: